Golf Chipping Tips and Drills [The Ultimate Guide]

One of the most important abilities a pro golfer may have is the ability to chip a golf ball. When you know the pro chipping tips and can regularly get the ball up and down to beat your mates, you’ll reduce your score and make your buddies envious. What exactly is a chip shot? A standard chip shot goes a short distance in the air and rolls to the pin with more control and consistency than a standard shot. Because a chip shot is a short, controlled swing with little to no wrist bent, it differs from a complete swing. The sensation you should get is that your arms are riding along with your chest, with a little bend back and forth. The sensation of your arms and chest remaining linked will aid distance management, leaving you with just a short putt.

It is therefore important to learn the best way to execute a chipping shot if you wish to bring you’re a game every single time. So, without further ado, these are the best golf chipping tips for successful golfers.

Prepare for a chip shot

A chip shot is straightforward to set up, with your feet close together, shoulders close to level, and the ball in the middle of your stance. Your aim line should be somewhat wide in your posture.

With the Swing Align Short Game Training Aid, learn how to set up a chip shot.

Keep your feet together as much as possible. This allows you to easily turn your body, which is crucial while chipping!

Make sure you’re leaning forward a little. Placing your front shoulder exactly over your front foot is a good way to start. This will aid you in landing a firm, slightly downward hit on the ball.

Maintain a straight right arm (for right-hand golfers). This will ensure that you have the right distance between you and the ball, as well as perfect posture with your spine straight and shoulders level.

A solid triangle is formed by your arms and shoulders. The Swing Align Short Game gadget can assist you in obtaining the sensation of a perfect setup. This is one of the most effective golf chipping tips.

Standing in a somewhat open position. This will assist you in maintaining appropriate body rotation. To begin your downswing, press your right knee forward if you need assistance spinning through the ball.

mistakes to avoid in a chip shot

Top mistakes to avoid in a chip shot

What is the right method for chipping? Above important, maintain your arms and hands still and use your chest and shoulders to make a controlled stroke. When learning how to chip a golf ball, there are a few frequent blunders to avoid.

In an attempt to help the ball up

Do not attempt to assist the ball in flight! Maintain a level posture with your shoulders, a straight spine up and down, and no tilting or tipping back. When you lean back, your hips and hands are pushed too far forward, causing your club to bottom out before the ball. This causes the ball to be struck fat and fall short of the pin, or, in the worst-case scenario, the dreaded chunk shot, in which the ball merely travels a few feet. Allow your clubs’ lofts to do the job for you.

Too far forward ball position

Putting the ball too far forward makes hitting effective chip shots with a regulated and slightly descending stroke practically difficult. Make sure the ball is no farther forward than the center of your stance, and that your club shaft and left arm are almost parallel. If you place the ball too far forward, you’ll be more likely to hit it thin, resulting in a shot that goes beyond the pin or, in the worst-case scenario, a skull shot over and over the green. This is one of the most popular golf chipping tips out there.

Swing and don’t hit

Don’t attempt to strike the ball with your chip shot! Turn slightly to the inside as you swing the club back with your chest and shoulders. Trying to strike the ball with your hands will lead you to get too handsy and flip the ball. The wrist motion in a chip shot is little. If you have a tiny bend in your right wrist on the way back, maintain it that way as you swing into contact. There will be no flipping! Don’t allow your left wrist to give out on you.

The failure to rotate

Golfers often make the error of neglecting to twist their lower body during chip shots. When hitting golf chip shots, it’s common to merely swing with the arms and miss out on what should be a tiny golf swing with somebody’s rotation. This will help to avoid poor contact and distance control resulting from failing to spin.

The foundations of excellent chipping

Because the golf ball is only concerned about the impact, we must regulate the following chipping tips to accomplish the desired results:

Understanding the impact variables displayed in this figure is required for a good chipping technique.

A graphic illustrating these topics may be seen above. Assume they’re all happening at the same time, and I’ve extended the effect out a bit to make the visual more visible.

The angle at which the clubhead approaches the ground is known as the angle of attack.

The bottom of your swing arc in respect to the ball, generally immediately ahead of the ball, is known as the low point.

The loft on the clubface at impact is called a dynamic loft, and it’s generally lower than the loft at address.

The difference between the dynamic loft and the angle of attack is known as a spin loft.

Below is a second image that explains strike centeredness. The majority of golfers are aware that the ball should be struck in the center of the grooves between the heel and toe, but we must also consider how high up the clubface the ball strikes. This variable is influenced by your low point, angle of attack, dynamic loft, and golf ball lay.

A golf ball is shown in the center of the clubface, with arrows going up and down, as well as left and right.

Practice Drill for a chip shot

Rehearsing your short game swing while focusing on moving your lower body is a terrific golf short-game practice activity. This practice may be done at home without a golf ball or at the range while chipping.

Place the Swing Align gadget directly above the knees on your lower body

Place one on either side of your feet and tilt them approximately 30 degrees away from your goal line, using the short rod pieces from the Swing Junction.

Match the angle of the alignment rod linked to your legs to the short rods on the ground when you move your chest and lower body slightly back and forth while chipping or practicing your swing.

Check your rotation against the rod on the ground near your front foot by stopping and holding your follow-through posture.

Most golfers will require the bigger Swing Align XL cuffs golf swing training equipment to fit on their lower body while practicing this workout. For both upper and lower body drills, the Swing Align Pro Bundle includes both Standard and XL cuffs.

Pitching vs. Chipping

A pitch shot travels farther than a roll shot and comes to a faster halt. Pitch shots need a longer swing in which the right arm begins to fold and the wrists are more hinged. This results in a longer, faster swing. To drag the club through the ball, rotate your torso, but don’t flick your wrists like a chip shot!

Swing alignment will help you improve your short game!

What’s the best way to improve your golf chip shots? What’s the best way to avoid hitting fat and skinny chip shots? With a Swing Align or Swing Align Short Game trainer, it’s simple if you use the Swing Align golf training device on your legs right above the knees, you’ll be able to see whether or not your lower body is rotating appropriately. Although there is less rotation in chipping and pitching than in a complete swing, rotation is still important for well-executed golf short game strokes.

To establish a solid set-up and a controlled and linked short game swing, use the Swing Align Short Game trainer. The short game rod will generate and maintain the right space between your arms, ensuring that they remain linked and move at the same speed throughout your chip shots, allowing you to manage distance better. This is one of the primary techniques that inculcate the golf chipping tips.


Chipping station set erected

The goal of a good setup is to make establishing a good impact position as easy as possible while allowing things to move about freely when chipping. We want to generate a slightly decreasing angle of attack at contact, with the low point directly ahead of the golf ball.

We can do this by putting 60% of our weight on our front foot and keeping the ball in the middle of our stance. You may place the ball anywhere inside the yellow-colored region, but the setup indicated here makes creating a descending stroke and low point directly ahead of the ball extremely simple.

The ball should be in the center of your stance, and your weight should be on your front foot while chipping.

The breadth of your stance should be smaller than a complete shot. The broader your stance, the more difficult it is to rotate your lower body back and through. However, some lower body rotation is beneficial since it adds impetus to your pivot and can help with a perfect chip shot.

Backswing with a chopping motion

The backswing is made up of three components: body pivot, arm swing, and wrist hinge. You have a lot of control over how much of each you use. A broader, shallower arc with less stored power emerges from more body pivot and fewer wrists. This will result in lofted wedge strokes that rise high in the air.

Greater wrists and less body rotation, on the other hand, produces a higher arc and more stored power. This results in a steeper angle of attack and, in certain cases, greater spin loft, resulting in lower-flighted chip shots with more spin.

Notice how the right arm folds and the wrists have a little bend in the movement above.

Down the line golf chipping stroke

The arms and club traverse in an arc around your body.

Backswing chipping suggestions

You may experiment with how much body turn, arms, and to hinge you make during your backswing, as I described previously. Try hitting chips shots with all of your body turned and no wrists, then try no body movement and all of your wrists. Finally, to hit chip shots, just let your arms glide back and through. This easy practice will quickly show you how each impacts impact and the types of chip shots you may make.

Despite the lighthearted approach described above, there are a few crucial aspects I recommend you include in order to become a great chipper.

Head in a stable position

If you look at the head position in each of the above sequences, you’ll note that it hardly moves. Many golfers who have trouble chipping have a little amount of movement in their backswing. Although 1-2 inches of displacement may not seem to be much, it has significantly impacted your low point, striking center, and angle of attack.

Action using the right arm

One of the fastest chipping tips is to backswing without a club and make sure your right palm is facing out in front of you as you finish. This action helps you to keep the club on a short arc while still maintaining the club’s natural loft and making it simpler to utilize the bounce (sole of the club) appropriately.

Downswing with a thud

The goal of your downswing should be to collect the golf ball as you spin towards your target. Here are a few crucial points to remember:

Everything else follows the body and chest as it rotates towards the target. The chest, arms, and club all seem to go through as one unit to me, however, the screen photos imply the body moves forward fractionally (feel vs reality).

Also, note how the stance angles are maintained until after contact, yet the head turns freely, practically following the golf ball to the goal. Maintaining your stance angles ensures that you hit the center of the face and that the low point of your swing arc remains where you want it to be.

When chipped, the body turns through to the target on the screen.

The most common misconception in chipping is that you should keep your head down and not rotate. Yes, you want to maintain good posture, but allowing your head to turn through allows you to use your whole body!

The angle of the lead arm and shaft

We’re six inches after contact in the picture below, but observe how the lead arm and club shaft are still in a straight line. This stance generates a large window when the loft on your club (dynamic loft) remains stable through contact. Many golfers have a modest degree of left wrist extension at this stage — 4-5o may not seem like much, but it means your sand wedge has suddenly become a lob wedge. When chipping, the consequence is changing launch circumstances and distance control.

Minimal wrist movement at contact also minimizes undesired clubhead acceleration and maintains a constant angle of attack and spin loft. Apart from impact, I believe the posture below is the most crucial of the chipping tips.

Face the club squarely towards the target

If you want to practice maintaining your clubface square for longer, consider keeping the logo on your glove pointed towards your aim for as long as possible at contact.

Finally, a word of caution for anybody still attempting to lift the ball into the air when chipping. Take note of how low the clubhead is to the ground at this time, virtually under the golf ball. Instead of assisting the ball into the air, concentrate on brushing the grass, making good contact, and letting the loft of the club do the job.

The angle of the face

When you take your golf grip, the second element to consider is how square, open, or closed your clubface is. That’s correct, I stated closed. The bounce of a club with an open face is increased, and you have more loft to deal with. This is excellent for bringing photos out of the woodwork.

Closing the clubface helps the toe dig down and through an uncomfortable lie by reducing bounce. If you have a difficult lay in the rough and a lot of green to deal with, this shot may be quite useful.

You may now change the flight and release of your chip shots with each club by using the two knobs above (ball position & face angle). It’s worthwhile to experiment with each option to see which ones provide the most consistent results for you.

Always choose the one that will reduce the distance between you and the hole over a 10-shot average. This will improve your scrambling percentages and score.

Putting it to Use

The finest players of short games like seeing what they can come up with. Grab 3-5 balls and experiment with your ball location and face angle after you’ve mastered these chipping tips.

Frequently Asked Questions

Should you open your stance when chipping?

A chip shot is straightforward to set up, with your feet close together, shoulders close to level, and the ball in the middle of your stance. Your aim line should be somewhat wide in your posture. Keep your feet together as much as possible. This allows you to easily turn your body, which is one of the crucial chipping tips!

Should you open clubface when chipping?

Yes, most of the time, because most of the time your clubface isn’t square. You open it up a touch, and the open stance compensates for that. In addition, an open stance causes the golf ball to fade, thus aiming left helps you play the face. The ball will certainly roll like a putt when it lands.

Why do I hit behind the ball when chipping?

A lack of upper body rotation through the ball is the most common problem from a technical standpoint.  Using the bounce of the club appropriately is one of the most important aspects of a solid short game. The second killer move is to imagine the clubhead moving too swiftly around the golfer’s torso.

Last Thoughts

Controlling the launch of your golf ball is the key to great chipping. We’ve gone through the impact elements that influence how your ball launches, as well as the fundamentals of chipping technique, to assist you to achieve the same impact and flight every time.

We’ve covered a lot, but perhaps you’ll find this to be a useful resource for improving your short game abilities. Make a few notes and see if you can hit five consecutive chip shots that are all the same. Once you’ve mastered all these chipping tips, experiment with other ball positions and clubface angles to see what other chip shots you can come up with.

Leave a Comment